MAC Interlock Control Box is to interlock between MAC Rotation device (such as, Positioner, Open-Chuck Positioner, Pipe-roller, etc.) and Welding Machine (such as, MIG, MAG, CO2 and TIG Welding Machine). This is used as one of components of TOTAL-MAC.
TCS- 4000 Timer type |
|
Features:
|
TCS-4000 can be connect with positioners which is equipped with Foot Switch (such as, Mini-positioners,Pipe-Roller, Hollow positioners (MAC-TURN), etc. |
|
Connection among TCS-4000, Positioners and Welding Machines are very simple. Positioners are no need to modify for this connection. |
|
Setting of welding time is very simple. Count welding time (i.e. time of
one-rotation) first and then set the time desired into Digital Timer. |
|
Welding start is performed without fail, since WCR is provided. |
|
Timer for Crater and Initial current for TIG are provided. |
|
2 types, One is for TIG Welding M/c. and the other is for CO2 Welding M/c. |
|
TCS-4000 |
|
Specifications
Model |
TCS- 4000 |
Type |
Type - C |
Type - T |
Welding M/c. |
CO2 |
TIG |
Crater |
Provided |
Provided |
WCR |
Provided |
Provided |
Setting time range |
1.0 sec. ~ 99 min. 99 sec. / 0.1 sec. ~ 999.9 sec. |
Initial current timer |
Max. 5 sec. |
Crater treatment timer |
Max. 5 sec. |
Power supply |
AC 100V., 50/60Hz., 1-Phase |
Dimensions (W×D×H) |
172 ×252 ×150mm |
Weight |
5kgs |
Note: Specifications are subject to change without priornotice. |
TCS- 6000 Digital type |
TCS-6000
|
Features:
|
Timer for Overlap welding, Crater and Initial current for TIG are provided.
Rotation during crater treatment is also possible. |
|
Function of returning to original position after welding is provided. |
|
Specifications
Model |
TCS-6000-3 |
TCS-6000-6 |
TCS-6000-S |
Rotation-start
delay timer |
0 ~ 5.0 sec. |
Initial current timer |
0 ~ 5.0 sec. |
Crater treatment timer |
0 ~ 5.0 sec. |
Overlap welding timer |
0 ~ 999.9 sec. |
Not provided |
Not provided |
Welding time |
One-rotation.
By limit switch |
By Digital counter.
Multi-pass welding
is available. |
By Digital counter.
Multi-pass welding.
is available. |
Original position
detection |
Limit switch |
Not provided |
Limit switch |
Power supply |
AC1Ø 100V 50/60Hz |
Dimensions |
288 ×253 ×150mm (W×D×H) |
Weight |
10kgs |
Note: Specifications are subject to change without prior notice. |
|