| LIGHT DUTY POSITIONERS | MEDIUM DUTY & HEAVY DUTY POSITIONERS |
| LIGHT DUTY TURNING ROLLS | MEDIUM DUTY & HEAVY DUTY TURNING ROLLS |
| WELDING CHUCKS | PIPE ROLLER | ROLLING EARTH & BAND EARTH |
| OPEN-CHUCK POSITIONERS | HOLLOW POSITIONER-MAC TURN |
MEDIUM DUTY TURNING ROLLS
RD-5-INW
Heavy duty worm gear drives fully enclosed and oil immersed for long life and protection from contaminants such as weld spatter and slag.
Each drive roll is independently powered (two motor system) eliminating the maintenance and problems associated with drive shaft systems.

Medium & Heavy Duty Turning Rolls (5,000kgs and larger)

Standard Features:
AC inverter drive with LED frequency display for speed adjustment.
Hand held push button pendant controls with FOR/STOP/REV and speed adjustment.
Fully adjustable roll to roll center distance by hand wheel through lead screw, allows for fast center distance adjustment optimum contact angle of work-piece.
Machined bed on the idler and drive roll for perfect alignment.


RD-10-INW

RD-20-INW

RD-40-INW

RRD-60-INW


HEAVY DUTY TURNING ROLLS

RWD-300-IN

RD-500-IN


Specifications
Model Loading
Capacity

(kgs)
Workpiece
Diameter
( Ø mm)
Roll
Periphera
Speed
(mm/min.)
Roll O.D.
×
Width
(mm)
Driving
Motor
Speed
Regulating
Roll-to-Roll
Distance
Adjustment
Drive Dimensions
(L ×W ×H )
(mm)
Weight
(kgs)
RD-5-INW 5,000 300 ~
3,000
100 ~
1,000
Ø 250×130
0.2kW×2sets
Dial of
Pendant
Manually
operated
screw
Double
Wheel
2,100×500×450 550
RD-10-INW 10,000 400 ~
3,000
Ø 270×130
0.4kW×2sets
2,200×400×530 850
RD-20-INW 20,000 400 ~
3,500
Ø 315×170
0.75kW×2sets
2,550×500×600 1,200
RD-40-INW 40,000 400 ~
4,000
100 ~
1,000
Ø 350×220
0.75kW×2sets
Dial of
Pendant
Manually
operated
screw
Double
Wheel
2,800×700×660 1,800
RD-60-INW 60,000 500 ~
6,000
Ø 400×260
1.5kW×2sets
3,500×800×700 2,800
RD-80-INW 80,000 600 ~
7,000
Ø 470×300 4,500×850×800 4,500
RD-100-INW 100,000 600 ~
7,000
Ø 470×340
2.2kW×2sets
4,800×900×900 5,500
RD-200-INW 200,000 700 ~
8,000
100 ~
1,000

3.7kW×2sets
Dial of
Pendant
Manually
operated
screw
Double
Wheel
RD-300-INW 300,000 1,000 ~
8,000

5.5kW×2sets
RD-500-INW 500,000 1,000 ~
10,000
RD-700-INW 700,000 1,000 ~
10,000
Note: Specifications are subject to change without prior notice.



| LIGHT DUTY POSITIONERS | MEDIUM DUTY & HEAVY DUTY POSITIONERS |
| LIGHT DUTY TURNING ROLLS | MEDIUM DUTY & HEAVY DUTY TURNING ROLLS |
| WELDING CHUCKS | PIPE ROLLER | ROLLING EARTH & BAND EARTH |
| OPEN-CHUCK POSITIONERS | HOLLOW POSITIONER-MAC TURN |



TO HOME PAGE


© 2000 ~ MATSUMOTO KIKAI CO.,LTD. All rights reserved.