MATSUMOTO KIKAI CO.,LTD. /Positioners, etc./LIGHT DUTY POSITIONERS

LIGHT DUTY POSITIONERS

PS Type positioners (Below 600 kg capacity)

Standard Features:

•	Variable speed table rotation cw & ccw.
•	Machined tee-slotted tables with centering grooves.
•	On/off electric foot control.
•	Table tilting from 0 to 90 degrees.
•	Heavy duty welding ground system.
•	Self locking worm gear rotation drive.

PS-1F

Loading capacity at 90º : 40kgs
Standard capacity	5	15
Centroid Eccentricity (A)	25mm	10mm
Centroid Height (B)	100mm	100mm

PS-2F

Loading capacity at 90º : 150 kgs
Standard capacity	5	10
Centroid Eccentricity (A)	50mm	25mm
Centroid Height (B)	150mm	150mm

PS-3F

Loading capacity at 90º : 300 kgs
Standard capacity	2.5	5
Centroid Eccentricity (A)	50mm	25mm
Centroid Height (B)	200mm	200mm

PS-4F

Loading capacity at 90º : 500kgs
Standard capacity	0.5	1
Centroid Eccentricity (A)	100mm	50mm
Centroid Height (B)	150mm	150mm

Specifications

Model		TABLE				Power Supply (V)	Loading Capacity at 90º Figure in ( ) is loading Capacity at 0º (kgs)	Table Height (mm)	Rated welding current (below 50% Duty Cycle)	Applicatable Chuck	Weight (kgs)
		Rotation Speed (r.p.m)	Dia. ( Ø mm)	Tilting Angle	Tilting Method
PS- 1F	5	0.3 ~ 5	300	0 ~ 90º	Manual	AC, 1-phase 50/60Hz.	40 (80)	378	500A	WP- 200	21
	15	1 ~ 15
PS- 2F	5	0.3 ~ 5	350	0 ~ 90º	Manual	AC, 1-phase 50/60Hz.	150 (250)	400	500A	WP- 300	50
	10	1 ~ 10
PS-3F	2.5	0.2 ~ 2.5	450	0 ~ 90º	Manual	AC, 1-phase 50/60Hz.	300 (450)	480	500A	WP- 400	135
	5	0.3 ~ 5
PS-4F	0.5	0.05 ~ 0.5	600	0 ~ 90º	Motor Driven	AC, 3-phase 50/60Hz.	500 (630)	630	800A	WPT- 600	280
	1	0.1 ~ 1

Note: 1) Operation: Rotation direction change-over switch, Speed Regulating Dial, Foot Switch for Rotation On/Off.
2) Specifications are subject to change without prior notice.

TO HOME PAGE