OPEN-CHUCK POSITIONERS |
|
Open-chuck Positioners were developed to compensate the disadvantages of standard positioners and turning rolls, and are primarily used for welding of pipes and for applications of higher level than that of positioners. As the rotary shat is hollow and notched, even work-pieces of intricated shape can be rotated. Further high accurate rotation is available, since the rotary ring gear is large to work-piece.
Open-chuck Positioners were developed to meet following demands;
|
MOPC-125S-V |
MOPC-250S-H |
MOPC-450R |
|
APPLICATION OF OPEN CHUCK |
Specifications
Model |
MOPC-
125S-V |
MOPC-
125S-H |
MOPC-
125R |
MOPC-
250S-V |
MOPC-
250S-H |
MOPC-
250R |
MOPC-
450S-V |
MOPC-
450S-H |
MOPC-
450R |
Hollow bore |
Ø 145mm |
Ø 270mm |
Ø 462mm |
Rotation speed |
0.4 ~ 3.5 r.p.m |
0.1 ~ 1.5 r.p.m |
0.05 ~ 1 r.p.m |
Tilting
mechanism |
Not provided |
Manual |
Not provided |
Motor-Driven |
Not provided |
Motor-Driven |
Pipe dia. range
(mm) |
Ø 42.7 ~ 139.8 |
Ø 89.1 ~ 267.4 |
Ø 139.8 ~ 457.2 |
Max. loading
capacity |
125kgs |
300kgs |
800kgs |
Rotation torque |
19.6N m |
196N m |
588N m |
Centroid
eccentricity |
1.6cm |
6.5cm |
7.5cm |
Centroid height.
(from
chuck surface) |
4cm |
10cm |
10cm |
Chuck |
Interlocked chuck |
Interlocked chuck |
Interlocked chuck |
Dimensions |
|
W |
(mm) |
|
D |
|
|
H |
|
710
400
590 |
500
400
830 |
935
565
980 |
890
700 1,000 |
900
600 1,160 |
1,500
580 1,284 |
1,800
900 1,470 |
1,360
800 1,980 |
2,150
840 2,050 |
Power supply |
AC 100V., 50/60Hz., 1-Phase |
AC 200V., 50/60Hz., 3-Phase |
AC 200V., 50/60Hz., 3-Phase |
Weight
(kgs) |
90 |
100 |
130 |
300 |
310 |
600 |
1,400 |
1,450 |
2,200 |
Note: Specifications are subject change without prior notice. |
|