MATSUMOTO KIKAI CO.,LTD./Positioners, etc./HOLLOW POSITIONER-MAC TURN

MAC TURN HOLLOW BORE POSITIONER

Standard Features:

•	Large hollow bore for long work-pieces such as pipe, shafts and hoses.
•	Two separate chuck can be used to load work-pieces on each side.
•	Chucks can be tilted 360 degrees for optimum welding position.
•	Infinity variable speed table rotation.
•	Heavy duty welding ground 500 amps at 50% duty cycle.
•	On/off electric foot control or pendant switch.
•	Eliminates the need for using an outboard pipe support for long pieces of pipe.
•	Can be used with interlock control box and torch stand for automatic welding.

MT-2C

Specifications

Model	MT- 2C- 2.5	MT- 2C- 5
Max. load. capacity	300kgs
Rotation speed	0.25 ~ 2.5 r.p.m	0.5 ~ 5 r.p.m
Applicable chuck (OPTION)	WP- 300 12kg × 2sets
Power supply	50/60Hz., 1-Phase
Centroid. eccentricity	50mm	25mm
Centroid height.	170mm (from center of shaft)
Rotating axle bore	Ø 100mm
Tilting angle	360º by manual handle
Dimension. (W×D×H)	910 × 510 × 690mm
Weight	130kgs

Note: 1) Operation 1. Rotation direction change-over switch
2. Rotation: by Foot switch (inching)
2) Specifications are subject change without prior notice.

MT-3C

Specifications

Model	MT-3C-1	MT-3C-2.5	MT-3C-5
Max. load. capacity	500kgs
Rotation speed	0.1 ~ 1 r.p.m	0.25 ~ 2.5 r.p.m	0.5 ~ 5 r.p.m
Applicable chuck (OPTION)	WP- 400 22kg × 2sets
Power supply	50/60Hz., 1-Phase
Centroid. eccentricity	50mm	30mm	15mm
Centroid height.	200mm (from center of shaft)
Rotating axle bore	Ø 170mm
Tilting angle	360º by manual handle
Dimension. (W×D×H)	1,150 × 580 × 940mm
Weight	250kgs

Note: 1) Operation 1. Rotation direction change-over switch
2. Rotation: by Foot switch (inching)
2) Specifications are subject change without prior notice.

TO HOME PAGE