WELDING CHUCKS |
WP type
WPT type |
Standard Features WP & WPT Series Chucks:
|
3-Jaw scroll chucks with reversible jaws. |
|
All three jaws operate simultaneously centering the work-piece. |
|
Because of their light weight and lower profile, these chucks allow for machine capacity to be utilized for the work-piece. |
|
Quick and easy loading un-loading of parts. |
|
Large outside diameter gripping range. |
Specifications
Model |
Clamp Diameter (Ømm) |
Weight
(kgs) |
Outside
clamping |
Inside
clamping |
WP-200 |
20 ~ 130 |
110 ~ 210 |
6 |
WP-300 |
80 ~ 190 |
170 ~ 280 |
12 |
WP-400 |
120 ~ 250 |
250 ~ 380 |
22 |
WPT-600 |
85 ~ 530 |
170 ~ 615 |
68 |
WPT-1000 |
85 ~ 955 |
175 ~ 1,045 |
145 |
WPT-1500 |
180 ~ 1,445 |
280 ~ 1,535 |
340 |
Note: Specifications are subject to change
without prior notice. |
|
WELDING CHUCKS
(FOR POK TYPE POSITIONERS) |
50PC |
Standard Features for PC Series Chucks:
|
The PC series chucks offer a wider application range and can be used on
both cylindrical and rectangular shaped work-piece. |
|
Higher clamping for than 3-jaw type chucks. |
|
The PC series chuck consists of two independent jaws and two interlocked
self-centering jaws. |
|
Large outside diameter gripping range. |
Specifications
Model |
Applicatable
Positioner |
Loading
capacity
(kgs) |
Clamp Diameter (Ømm) |
Weight
(kgs) |
Outside
clamping |
Inside
clamping |
10PC |
POK-10 |
1,000 |
150 ~
800 |
350 ~
950 |
60 |
20PC |
POK-20 |
2,000 |
190 ~
850 |
430 ~
1,070 |
95 |
30PC |
POK-30 |
3,000 |
220 ~
900 |
550 ~
1,190 |
160 |
50PC |
POK-50 |
5,000 |
260 ~
1,000 |
630 ~
1,300 |
270 |
Note: Specifications are subject to changewithout prior notice. |
|
NOTE: The WP, WPT and PC series chucks are designed for low speed welding applications and should not be used for high speed machining. |
|